Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Highland Creek
If your Highland Creek chimney is leaking after a storm or the cap on your prefab flue looks rusted at the seams, you’re dealing with the most common cap and crown problem in this part of north Charlotte. We handle cap replacement, multi-flue caps, custom caps, crown repair, and crown coating for the brick-veneer, factory-built fireplace homes that make up most of Highland Creek, and we inspect before we recommend anything. Call (888) 378-0297. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Highland Creek Homeowners Call Chimney Sweep Dilworth for Chimney Cap & Crown
Most of the chimneys we see in Highland Creek aren’t masonry stacks with crumbling mortar. They’re factory-built fireplaces with a metal flue, a side-wall chase, and a builder-grade cap that was installed to meet code and nothing more. That changes the whole diagnosis. Tuckpointing skills don’t help much here; knowing where a prefab chase cover fastens and how a storm collar seals is what solves the leak.
We work in Highland Creek often enough to recognize the failure patterns across the neighborhood’s 1990s-2000s phases. The same cap designs, the same seam rust, the same chase-cover fasteners pulling loose. When you call about a leak, we can ask the right questions before anyone gets in a truck. Our technicians have up to 12 years of experience with prefab systems and the parts that fit them, and we source caps and venting from Gelco, Olympia Chimney, and Famco. The written estimate sets the final price, and the estimate itself is free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Highland Creek
Cap Replacement
Replacing a failing builder-grade cap is the single most common fix in Highland Creek. On a prefab flue, the original cap is usually a light-gauge steel unit that has rusted through at the seams or lost its screen to pollen and nesting. We pull it, check the flue and storm collar, and install a replacement sized to your specific flue. Our chimney cap & crown team treats this as a repair and an inspection in one visit.

Multi-Flue Cap
Many Highland Creek homes have two flues side by side in the same chase, one for the fireplace and one for a furnace or water heater. A single multi-flue cap covers both and seals the top of the chase in one piece, which cuts down on the water that gets in around individual caps. We measure both flues and match the cap to the chase opening.

Custom Cap
When a standard size doesn’t fit the chase, or when a homeowner wants a cap that matches the house rather than a stock unit, we have custom caps fabricated from Copperfield. This makes sense on Highland Creek homes where the chase is wider than average or the roofline calls for a specific profile. The fit is measured, not guessed.

Crown Repair and Crown Coating
On the masonry crowns that do exist in Highland Creek, the crown is the concrete or mortar cap at the top of the stack that sheds water away from the flue. When it cracks, water runs down into the chimney instead of off it. We repair cracked crowns and apply a crown coating to seal the surface. Catching a hairline crack early is far cheaper than rebuilding the crown later.
Trusted Brands We Service in Highland Creek
We install and service caps and venting from Gelco, Olympia Chimney, Famco, and Copperfield, and we resurface flues with HeatShield and install DuraFlex liner systems when a cap leak has done damage below. These are professional-grade brands that certified chimney specialists specify, and they’re what holds up in Piedmont humidity. We don’t carry a warehouse of parts, so we order to the job and get what your flue actually needs. No substitution games. If a standard cap won’t fit your chase, we spec a custom one.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Highland Creek Homes
- Rusted builder-grade caps. The caps installed across Highland Creek’s 1990s and 2000s phases are light-gauge steel that rusts through at the seams after repeated summer thunderstorms. Water gets in through pinholes you can’t see from the ground.
- Loose chase covers. On the brick-veneer side-wall chases common here, the cover plate loosens or cracks at the fasteners. That produces a leak that looks like a roof or masonry problem when it’s really a cover plate.
- Clogged screens and nesting. Heavy spring pollen and humid summers pack the cap screen and invite birds and insects into the chase, which restricts draft. An off-season inspection catches this before the first fire of the year.
- Flue rust from water intrusion. Once water is getting past the cap, the metal flue liner can rust from the top down. A cap that’s fine at a glance can still be letting water in at the collar.
Pricing for Chimney Cap & Crown in Highland Creek, NC
A typical cap replacement in Highland Creek runs $250-$550, depending on flue size, cap style, and how much of the old unit needs to come off. A multi-flue cap usually runs $400-$750 because it covers two flues and seals the chase in one piece. Custom fabricated caps from Copperfield typically run $550-$1,100. Crown repair runs $300-$700, and a crown coating adds $200-$450. These are estimated ranges for the Highland Creek market; the written estimate you get after we inspect sets the final price. The estimate is free, and we document what we find before we recommend any work.
We Also Serve Cities Near Highland Creek
We also work in Derita, NoDa, Plaza Midwood, and Elizabeth, and the cap and chase-cover work there is similar. If you’re just outside Highland Creek and not sure whether we cover your street, call and we’ll tell you straight. Same inspection-first approach, same written estimate before any work begins.
Serving Highland Creek, NC – Our Local Coverage Area
We serve Highland Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Highland Creek
The cap usually isn’t fine; the failure is at a seam or the storm collar, where you can’t see it from the ground. On Highland Creek’s 1990s-2000s prefab homes, builder-grade caps and chase covers rust or pull loose at the seams after summer thunderstorms, and the water tracks down the chase. A technician checks the cap, the chase cover, and the storm collar first, because a “chimney leak” here is almost always one of those three and not the masonry. Call (888) 378-0297 for an exact quote; estimates are free.
Once a year is the standard for a factory-built fireplace, even in a home where you burn lightly. Highland Creek’s mild winters mean modest creosote, but the humid summers and heavy spring pollen feed rust, mold, and nesting in the chase and cap, so an off-season inspection matters more than a heavy sweep. It’s the cheapest way to catch a failing cap before water gets into the flue.
Yes. In most cases the cap can be replaced on its own without touching the flue or the chase, and that’s the right fix when the flue is sound. Replacing only the cap on a rusted builder-grade unit is exactly the kind of repair Highland Creek homeowners need. We inspect the flue and storm collar first to confirm nothing below needs attention. Call (888) 378-0297 for an exact quote; estimates are free.
A cap sits on top of the flue and keeps water, animals, and sparks out of the opening, while a crown is the concrete or mortar slab at the top of a masonry stack that sheds water away from the flue. Most Highland Creek homes are prefab with a cap and no true crown; masonry stacks elsewhere in the neighborhood may need crown repair. We tell you which one your home has after we look.
Yes. A gas-log fireplace still vents through the flue, and the cap still has to keep water and animals out of that flue. Gas logs produce their own moisture, and a failed cap lets in more, which accelerates rust on a prefab flue. We check the cap and the flue on gas-log setups the same way we do on wood-burning ones. Call (888) 378-0297 for an exact quote; estimates are free.
Whether your cap is rusted through or your chase cover has pulled loose, the fix is specific, and so is the estimate. Call (888) 378-0297. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, we document what we find before we recommend anything, and the written estimate sets the final price.
Written by the team at Chimney Sweep Dilworth.