Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Myers Park
Myers Park chimneys were built to be seen. The tall, ornate stacks rising off the front of a 1920s Tudor or Georgian are part of the architecture, which is exactly why the top of one is easy to neglect and expensive to lose. We work on Myers Park cap and crown jobs regularly, and we know what these older exteriors ask for: careful access, correctly sized caps, and a crown that actually sheds water instead of soaking it. Call (888) 378-0297 and we’ll book an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Myers Park Homeowners Call Chimney Sweep Dilworth for Chimney Cap & Crown
Most people who call us here have already been told something. A flue needs a liner, the crown is shot, the whole stack should come down. The detail missing from those conversations is evidence. We document what we find before we recommend anything: a camera run down the flue, photos of the crown and cap, and a plain explanation of what each image shows. If a crown can be coated and last several more seasons, we say so. If water is already tracking down onto spalling clay tile, you’ll see the tile and the loose mortar joint on the same screen.
That approach matters more in Myers Park than almost anywhere nearby, because the housing stock sets people up for the wrong advice. These are 1910s – 1940s houses, many with exterior chimneys and original clay tile liners, and the local habit of heavy fireplace use through the cool months means those flues have seen real mileage. We serve Myers Park often enough to recognize the shape of the problem before we’re on the roof. Our technicians have up to 12 years of experience, and they’ll show you what they see rather than tell you what to fear.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Myers Park
Cap Installation
A properly sized cap keeps rain, animals, and downdrafts out of a flue while still letting smoke and gases escape. On a Myers Park house with a wide multi-flue footprint, that usually means a fabricated cap rather than a stock galvanized box that leaves a gap at one edge. We fit from Gelco and Copperfield components, sized to the actual opening, with the flashing checked while we’re up there.

Cap Replacement
Old caps rust through, come loose in wind, or were simply the wrong size from the start. When we replace one in Myers Park, we measure the full opening and look at what the previous cap was hiding: a cracked crown, a spalled flue tile, or mortar that’s given up along the joint. That way the new cap goes on once, over a top that’s been assessed rather than guessed at.

Crown Repair
The crown is the sloped mortar cap at the very top of the chimney, and its job is to shed water away from the flue. Hairline cracks from Charlotte’s humid summers and occasional freeze-thaw snaps let water run straight down onto the original clay tile below. We rebuild failed crowns with a proper slope and overhang, which stops the leak at the source instead of sealing over it.

Crown Coating
Not every crown needs rebuilding. Where the mortar is sound but the surface is cracked and porous, a flexible coating from Gelco or Famco can restore the shedding surface and buy years before replacement. We’ll tell you honestly which of the two your crown needs, and we’ll say when either can safely wait until the next season. That’s the whole of it: repair when repair is right, and no work recommended without the photos to justify it.
These four services are part of our full chimney cap & crown work, which we handle from diagnosis through completed repair so one call covers the whole top of the chimney.
Trusted Brands We Service in Myers Park
We install from a short list of brands that certified chimney professionals specify: Gelco and Famco for caps and venting, Copperfield where copper is the better fit for a historic facade, DuraFlex for liner systems, and HeatShield for flue resurfacing. These are professional-grade materials, not the thin-gauge stock box you’ll find at a hardware store. We don’t carry an inventory of parts on hand, but we source the right cap for your chimney and get it installed without a long wait. If a cap has to be fabricated to fit a wide Myers Park flue opening, that’s normal here, and we’ll tell you the lead time up front.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Myers Park Homes
- A cap sold where the crown was the real problem. A cracked crown lets water past any cap and onto the clay tile below. Sealing the top with a cap while the crown is failing just traps the moisture in a different place.
- Stock caps on tall, ornate historic chimneys. The wide multi-flue openings on these facades don’t match an off-the-shelf size, so the cap ends up perched and gapped, leaving the flues open to rain, squirrels, and downdrafts.
- Spalling clay tile behind a summer odor. Long, humid Charlotte summers push creosote smell and spalling through unlined or clay-lined stacks, and an undersized cap that traps moisture rather than shedding it makes it worse.
- Crowns cracked by humidity and cold snaps. The mortar at the top cycles wet and dry and freezes and thaws, opening hairline cracks that widen into real leaks over a few seasons.
Pricing for Chimney Cap & Crown in Myers Park, NC
Cap and crown work is priced per job by a written estimate, and the estimate is free. Typical ranges in Myers Park run $275 – $650 for a single-flue cap installation, $400 – $950 for a multi-flue or custom cap sized to a wide historic opening, $350 – $800 for crown repair on a smaller chimney, and $1,200 – $2,400 to rebuild a large, tall crown where access and the sheer top surface drive the labor. Crown coating is the lighter option, usually $325 – $700 depending on the size of the top. On a tall exterior chimney, access is a real cost driver, and custom fabrication adds material time. What you’ll get is a written estimate setting the final price before any booking, and our recommendation of what can wait, what shouldn’t, and why.
| Service | Typical Myers Park Range |
|---|---|
| Single-flue cap installation | $275 – $650 |
| Multi-flue or custom cap | $400 – $950 |
| Crown repair (smaller chimney) | $350 – $800 |
| Crown rebuild (large, tall crown) | $1,200 – $2,400 |
| Crown coating | $325 – $700 |
We Also Serve Cities Near Myers Park
Myers Park sits right up against neighborhoods with the same older housing stock and the same cap and crown needs, so we cover them together. If you’re just over in Eastover, Elizabeth, Sedgefield, or Dilworth, the call and the approach are the same. One point of contact for the sweep, the inspection, and any repair the inspection turns up, so you’re not juggling trades for one chimney problem.
Serving Myers Park, NC – Our Local Coverage Area
We serve Myers Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Myers Park
No. A cap only shields the top of the flue from above, but a cracked crown lets water soak into the mortar and travel down onto the clay tile regardless of what’s sitting on top. We look at the crown first and confirm with photos before recommending a cap on its own. If the crown is failing, it’s the crown that needs the work. Call (888) 378-0297 for an inspection and a free estimate.
Because the chimneys here were built wide and tall, often serving several flues, and a stock cap is made to a standard size that doesn’t match those openings. A cap that doesn’t fit leaves gaps where rain, animals, and downdrafts get in, which defeats the point. We fabricate or size a multi-flue cap to the actual footprint, especially on the ornate exterior stacks these houses were built with. Call (888) 378-0297 and we’ll measure yours for free.
The crown is the sloped mortar cap at the top of the chimney, and its job is to shed water away from the flue. Charlotte’s humid summers keep the mortar wet, and occasional freeze-thaw cold snaps open hairline cracks that widen into real leaks over a few seasons. Once water gets into the original clay tile and mortar joints, they spall and loosen. A rebuilt or coated crown stops that at the source. Call (888) 378-0297 to have yours checked.
You see the evidence. Our inspections run a camera down the flue and take photos of the crown and cap, and we show you what those images reveal before any recommendation. If something can safely wait, we’ll tell you. Nothing gets sold on a hunch, and nothing gets upscaled without camera documentation you can look at yourself. Call (888) 378-0297 for a free estimate built on what we actually find.
Yes, often directly. An undersized or improperly fitted cap can restrict the flue, and a loose or gapped one lets downdrafts push smoke back into the room. On tall Myers Park chimneys, the wrong cap can make an old fireplace that already drafts poorly worse. A correctly sized cap sized to the actual opening usually improves draft rather than hurting it. Call (888) 378-0297 and we’ll check the cap and flue together.
If your chimney top has been neglected, or someone has already told you it needs work, start with an inspection you can see. Call (888) 378-0297 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Dilworth.